Steps to Watch with DirecTV One Box

You can watch with DirecTV One Box, 2 TVs,

• Buy a 2-way splitter for directv. You can see that the splitter has one input and two outputs.
• The coaxial cable must be placed to carry the signal on the input into the room that the DirecTV receiver is placed.
• A shorter coaxial cable should be placed on the DirecTV receiver output. This coaxial cable should be attached to the splitter input.
• The same should be done with the splitter’s output. Fix the coaxial cable and run the cable another end to the first TV and set the cable on the TV input.
• At the same time, run the second coaxial cable on the splitter from the second output to reach the second TV input.
• Turn on the DirecTV One Box receiver and watch both TVs. You can enjoy similar channels on both the TVs. Ensure each TV is properly tuned to receive the pictures.

Hooking 2 TVs to One Receiver, what is required?

Hooking 2 TVs to a receiver means the items required are:

• Coaxial cable splitter
• Coaxial cables.

Hooking 2 TVs is possible to one DirecTV receiver. This offers the advantage of watching in your home in different rooms the same TV programs. Of course, note that this will allow you to watch the same program in different rooms and not different channels. You can watch TV comfortably from the living room in the evenings and at night times from your bedroom.

Ascertain the cable is properly connected and it is attached to the satellite. The concept is simple. Connecting a different coaxial cable on the channel splitter to the available connector means you can plug into the ‘in’ port the other end on your secondary television. Thus, as the DirecTV satellite receiver dish is power on, both the televisions will display the station that the receiver is on.

The post How to Watch on DirecTV one box, 2 TVs in Two Rooms appeared first on Techandsoft.

Is cleaning a must

Like any other electronic items, dust is found on televisions and it is marred by blemishes. Cleaning your TV can be kept as a straightforward process, thereby avoiding pricey special chemicals.

The TV market now has changed and is filled with big-screen, superbright LED or LCD and OLED Tvs. However, many houses are having plasma TVs, the older sets, that even the TV manufacturing companies have stopped producing.

Cleaning older tube TV means there is more flexibility as it is a glass screen and allows general cleaning like you clean the other household glass items. For the glass screen, a window cleaner is acceptable to be used for cleaning.

Smart ways to clean your Samsung TV

There is nothing worse to watching a movie or a show straining. This is because the screen is covered or smudged in the dust. Cleaning your TV dust occasionally and clearing the fingerprint smudges is essential. Smart cleaning of your TV is essential so that it looks brand new and you can see the shows or movies.

Steps to clean

• It is very important to clean Samsung TV, but bear in mind not to use any soap, window cleaner, any cleanser having solvents such as ammonia, alcohol, benzene, or paint thinner, or any scouring powder.
• Never use paper towels or abrasive pads. You may strip the screen anti-glare coating off or scratch the screen causing permanent damage.
• Avoid spraying directly anything onto the TV screen or wiping gently. The TV screens may get damaged when it is pressed hard. The screens are fragile of the TV. Before plugging back the TV, ensure the screen is completely dry.

For general cleaning of Samsung TV, the screen and the frame of the TV may be cleaned using water and a microfiber cleaning cloth. Avoid spraying water onto the TV directly. You may apply water in a small amount to the microfiber cloth corner. But always stay away from wax, cleaning fluids, or chemicals for TV cleaning.

The post How to Clean Samsung TV in Smart ways, Do Not Miss the Instructions appeared first on Techandsoft.

Windows Startup Programs

As the Windows OS boot up, the preset software also starts. These are referred to as Startup Programs.  These can be added or removed from the list, though startup program may cause issues at times.

In case Windows has initiating problems in the saved programs, it will affect directly the startup process in the Windows. It will create problems such that the startup will be slow and on logging in there will be error messages appearing immediately.

Solution: You may go to the Control Panel, remove the application/software that is causing the problem during the Windows Startup.

Windows Update Error / failed

The frequent most problem is the Windows update failure or errors hindering the operating system. The reports are now higher with the Windows 10 release.  It is essential to know the problems causing ‘Windows Update Errors’.

Internet connection problems are the key reason. The methods to troubleshoot Lenovo laptop should be accurate. This update process fails the virus infection, cause malware failure or low system storage.

Solution: You may free up space for viruses in the computer in case you run short of. You may remove the application/software.

Blue Screen of Death

BSOD or Blue Screen of Death is a pretty Windows common issue. BSOD issues may be the simplest reasons and it may happen anytime. The problems such as Windows files missing or missing system results in creating issues such as BIOS and it results in BSOD. Likewise, the issues such as hard drive errors and overheating of the Lenovo laptop may trigger BSOD. Corrupt applications or startup programs result in BSOD issues.

Solution:  You may restart in safe mode the Windows and run the tool of System Diagnostics to identify the error.

Windows Registry Recovery

Lenovo laptop may look apt and not the Windows. The operating system comes up with new features every year and the registry problems stay the same. Here are the reasons causing Windows registry errors?

On searching the web you will come to know the reasons causing Windows registry errors. The key reason is due to the uninstalled software. These types of software leave behind files affecting negatively the Windows processes.

Solution: You may run the Windows Registry Checker Tool and consider troubleshooting the problem.

The post How to Troubleshoot Lenovo Laptop and its Technical Solutions appeared first on Techandsoft.

Recover Photos Deleted from DSLR camera

Do you have backup storing? If yes, the problem of photo recovery is solved. Just restore the photos deleted from your backup stored.

It is recommended always to have a data backup. However, if you do not have a backup to recover photos, use the Recovery Tool of DSLR Camera Photo. This is professionally recommended to use the Recovery software for DSLR camera photos. This is suitable for Sony, Canon, Nikon, Pentax, Olympus, DSLR cameras. It recovers RAW and normal image format files such as NRW, NEF, CRW, SRF, JPG/JPEG, ORF, CR2, PNG, and so on.

This software for photo recovery restores the audio and video files from different camera cards such as microSD, miniSD, SD, CF, MMC, SDXC, SDHC memory card, and so on. The benefit is that data loss is prevented and it also recovers photos from damaged, corrupted, broken, formatted, and virus-infected camera cards.

Steps to Recover From DLSR Camera Lost or Deleted Photos

1 step:  Firstly, install the software of Photo Recovery and launch on your computer. You may click ‘Recover Photo Audio& Video’ to get the photos, audio and video files recovered from any computer hard drive, external USB drive or SD card. Connect the media to the computer and start the process.

2 step: Choose the drive that facilitates to recover files. The list will appear showing external media and hard drive. Select the drive to scan and click on button ‘Scan’.

3 step: Clicking on the button ‘Scan’ means the software scanning begins. It will look for multimedia files.

4 step:  After scanning the hard disk and other selected volume, select files so that you preview them and click on the button ‘Recover’ to save on your computer.

Successfully, you got all the photos back. However, consider these preventive tips so that in future you are saved from losing data.

• Take regular backup of your data so that data loss is prevented.
• Do not use the digital camera if the battery is running out or is low.
• Do not remove the DSFR camera USB cable while the process of transferring is going on.
• Avoid using on different devices same memory card.

The post Photo Recovery from DSLR Camera – Get it Restored with Easy Steps appeared first on Techandsoft.

Use these tips and enjoy a better chance.

The camera fails to turn on

This problem is not new and mostly it fails to turn on owing to the battery. You must assure that your battery rechargeable pack is charged and also properly inserted.

The camera suddenly turns off 

The problem is that the feature of power saving in Sony camera is set and if you fail to push the button of the camera within the allotted time, it turns off. Sony cameras automatically shut down as the temperatures rise.

Images fail to record

This problem has reasons.

• Firstly, ascertain enough storage space is available in the internal memory or on the memory card.
• Ascertain the mode of shooting is set to ‘movie’ mode.
• The auto-focus camera feature does not have sufficient light to work efficiently.

Images are out of focus

Again here there may be several reasons to go out of focus:

• Ensure you maintain a distance from the subject.
• Choose the right mode so that the lighting conditions match.
• Use auto-focus or center the subject on a subject
• Keep the lens clean as if it is smudged or dirty, it may result in blurry photos

Strange dots are seen

The dots on the screen are due to slight malfunctions. They appear as they are beyond repair.

Cannot access internal memory photos

A memory card is found in most models of the Sony camera and with it, the internal memory cannot be accessible. Thus, take out the memory card and access it.

The indicator of battery charge is wrong

The indicator of battery charge misreads at times and this happens when the camera is used in very low or high temperatures. This problem if experienced in normal temperatures, it means you must discharge the battery fully once and again consider resetting the indicator after recharging the battery next time.  The feature of power saving in Sony camera is set perfectly.

The flash does not fire

Setting the flash to ‘forced off’ mode means it does not fire. You must reset to automatic mode the flash. You can also use a scene mode to shut the flash off or consider some other scene mode. The Sony camera issues are manageable once you know the tricks.

The post How to handle Sony Camera Issues –Know the simple tricks appeared first on Techandsoft.

Nevertheless, there is quick shutter repair that can be done as temporary relief. Of course, the time taken is based on the shutter damage level. Preventing your digital camera shutter stuck issue can be simply avoided by making frequent use of your digicam.

Problems faced

• Takes dark or black pictures
• Extremely bright pictures
• Overexposed pictures

A hint:  You can confirm stuck shutter by turning to any other mode of your camera, turn flash off, and look at the lens down and take a picture. If you see a tiny flicker in the lens center as the shutter closes and opens, it indicates proper functioning of the shutter.

Steps to fix a stuck shutter

Step 1 – Features off: Turn the camera features off if you know it will drain the digital camera battery. The features also include LCD and flash. If there is no viewfinder in your camera, you have to keep on the LCD.  If there is image stabilization, turn it off in your digital camera.

Step 2 – Camera Mode: Turn any setting with camera shutter repair but for auto. Your digital camera has a manual mode; you may switch to it if you are uncertain. In the manual mode, you can take pictures.

Step 3 – Battery Door: Open the door of the battery, after 7 seconds after taking a pic or cover for a few seconds and close it. Remember never turn the digicam off. The idea is to interrupt power while it is in the exposure and the power interruption in most cases ‘jog’ open the shutter.

Step 4 – Repeat: Complete the steps mentioned above as the shutter may be yet stuck on the digital camera features.  It is suggested you repeat the steps and continue until the shutter is not stuck any longer. You may also repeat five or twenty times the same process. It depends on the model and the make of your digital camera and the seriousness of the stuck shutter or damaged shutter.

The post Shutter Repair: A Simple Guide to Fix Digital Camera Stuck Shutter appeared first on Techandsoft.

Problems ahead to Know

Smashed glass and lens cap jammed:

At first sight, this is a dramatic problem. You may bump your camera or drop it. It is alright if it has proper protection. Having a lens filter helps a lot.

If you find the lens cap is jammed, take it to a camera store. At the same time, if your camera does not have a protective lens filter or a UV, get one before fixing the issue and evaluate the damage at the camera shop. However, it is best to have a combo of filter and cap offering maximum security.

White Hazy Large area (Exterior Lens Dust):

Small smudges or scratches on the camera lens exterior have nothing to disturb the image quality.  If you are wearing glasses the analogous can happen and this is because small scratches and smudges do not get noticed to your eye unless you seriously concentrate. Yet, it may be tough to spot.

An oily finger may leave on your camera a white haze. If so, use lens cleaner and avoid touching the side of the lens with cleaning cloth that already touched your finger.

Images fine, viewfinder suffers:

The dust is a problematic point. Dust showing on the mirror is annoying as it shows in the viewfinder as well, though your image quality may be clean. However, the mirrorless cameras are not of a problem as nothing gets affected.

First, ascertain the images are clean and you can do this by blowing them on a desktop monitor. It is preferred than inspecting it on an LCD screen.

If it bothers you still apart from the fine quality images, consider thinking twice before using an air blower or a brush. Remember the coating of the mirror gets scratches easily and is fragile. For digital camera problems, at the most start with consulting a camera store nearby and seek help. You can use canned air bottle to clean the camera.

The post Digital Camera Problems; Learn How To Solve Them appeared first on Techandsoft.

Problem 1 – Battery

The common issue faced by most users with Android phones is the battery drain. Battery stops performing as it did earlier or there is a rapid battery drain.

Solution: On noticing the battery drain is fast, you should check the apps draining your battery. This should be done by going in the settings menu the battery section.  On finding unusual strain caused by an app on the battery, you may uninstall the app, as the best option. You can also fix this issue by considering a software update.

Do simple things:

• Keep at a low level the display brightness.
• Use Greenify like apps

Problem 2 – Performance

Android Smartphone performance issues result in lag and stutter. The device in extreme cases reboots randomly or becomes warm even when it is not performing.

Solution:  From Google Play Store download Greenify app. Reduce the slowdowns by changing the settings of the apps that keep your phone active with the apps. There may be some rogue app causing issues to performance. Consider booting into safe mode your device. Delete a few apps added lastly or do a factory reset. Bear in mind that factory reset should be the last step and take a backup of your phone files.

Problem 3 – Connectivity

New devices face connectivity issues with Bluetooth and Wi-Fi.

Solution: Wi-Fi issues

• For ten seconds turn the router and the device off. Turn them on and try to connect
• Go to settings and switch off the power saving option.
• Use Wi-Fi analyzer and check your channel crowd.
• Go to settings-Wi-Fi, select ‘Forget’ with long-tapping on the connection. Now re-enter and try again.
• Ensure up to date router firmware, software and apps are up to date.

Bluetooth issues

There may be performance issues with car connection, check the manual of the manufacturer, the car and the device. Reset the connections. Ascertain you do not miss anything in the process of connection.

• Go to Bluetooth in the settings and ascertain nothing is changed.
• Go to Bluetooth in the settings and delete prior pairings and set fresh.
• Using multiple devices may cause issues with connection. Go for an update and address the issue.

Problem 4 – Google Play Store

Android Smartphone mostly features Google Play Store and this is the place for apps to keep up and running. Nevertheless, as all other things fail, Google Play Store also fails to work at times.

Solutions: With Google Play Store, there is no particular or potential solution.  Check your problem is due to your device and not with the services of Google’s. Here are a few steps to try:

• Forcefully closing the app
• Eliminating Play Store cache
• Repeatedly check for the disabled services or apps

The post Android Phones problems and their Solutions to fix them appeared first on Techandsoft.

Tip:  Recommended to take personal data backup of your phone before factory reset. This is because everything gets deleted from the device.

Factory Reset in Android Phone

Resetting is inside the settings as the default option in Android phones. The Smartphones come with this feature that helps easy navigation to the required setting.  Follow these steps:

• The first step is to identify the icon of settings of the phone and to see if it has a feature of settings search. Mostly it appears on the interface top.
• Tap on it and type ‘Factory Reset’. There may be different skins on Android so try with ‘Reset’ and try to reset.
• On stock Android, go to Settings – System – Reset Options – Erase all data – Reset Phone. This applies to all the other Smartphones.
• On tapping the button, your phone restarts and will be as new.

Also, you can follow the below steps to reset your Android Phone:

Factory Reset via Recovery Mode

There may be times when the Android device fails to boot properly or it may become a compulsion to opt for factory reset if so the recovery mode is an ideal place. Recovery mode allows a full device wipe, referred to as factory reset.

Android is produced by different manufacturers and it can be used as an OS.  However, the recovery menu may differ. On a stock Android device, pressing the power and volume up buttons together allows the feature to be accessed.

There is Factory Reset Protection, a great feature introduced by Google. This feature does not allow anyone else to do a factory reset for your device even if it is misplaced, lost or stolen. Thus, after a factory reset, Google account details should be entered.

The Factory Reset Protection activates using the Recovery Menu on resetting a device. Here are the steps:

• Switch off your Smartphone.
• Hold both, power and volume down buttons.
• As your phone is on, see an arrow and Start. Use the Volume and power buttons to navigate and select.
• Go to Recovery mode.
• Press the power button and select the option, it will restart.
• The screen will say No Command. Press and hold power and volume buttons so that it boots into the recovery.
• Use volume buttons to choose the option saying factory reset.
• Then press power button and prompt ‘Yes’ as confirmation for factor reset to proceed.

After the completion of the process, you will reach the menu for recovery. Click on the Reboot system and boot into the normal interface of your Smartphone. Log into Google account and use your new Smartphone.

The post Android Phones Factory Reset– here’s how you can do it appeared first on Techandsoft.

What is it?

Apple Pay is ideal for mobile payments. This is a digital wallet and features holdouts. Apple Pay stores securely your debit or credit card details on your phone. You can use the same to buy services and goods at cash registers and participating stores. You may also buy online stuff.

Instructions step-by-step to use Apple Pay

Load your debit or credit card

• Begin by opening on your iPhone the digital wallet app. It may be by default your first home screen.
• Tap ‘+” button appearing on the screen top-right corner and click on the next page as ‘Continue’.
• Tap on ‘Add Card’ and include your credit or debit card details by key-in the details or even by capturing a photo.
• On adding your payment card photo, the details auto-populate. You will be asked to enter the security code in the next screen.
• Select next and give the security code of your card and its expiry date, click next.
• Tap on Agree to accept the Terms and Conditions appearing in the bottom-right of the page and finish reading.
• Now get ready to use Apple Pay. You can see two symbols now; one will say Apple Pay and the next will be sideways four curved lines. You may choose from the screen bottom ‘Continue’.
• In the right bottom corner, three dots will appear to choose your billing address. Here you may key-in the information and click on ‘Done’ appearing in the corner top-right.

Using Apple Pay

Adding the card implies you may start using Apple Pay and there is no need for you to take a physical bank card. You can buy even with the lock screen. You just have to double-click the side button or the home button, select Pay with Passcode. On holding the device close to the card reader, the payment processor in the store will recognize the details.

You can pay even as you buy online stuff. The only thing you need to do is choose ‘Buy with Apple Pay’. You may use Face or Touch ID as transaction authentication. Apple Pay supports the providers of major debit and credit cards. This includes MasterCard, Visa, and American Express.

Apple payment system through mobile works with federal payment cards as well that has veteran’s benefits and social security paid using the debit cards. It also includes government-issued cards and Direct Express payment network through GSA SmartPay. It supports the federal government transactions; it means to pay to buy tickets or for gift items bought at national parks.

The post How to use Apple Pay, The digital wallet and Buy Online Stuff or Pay at the stores appeared first on Techandsoft.